Your Position:Home > Case

Latex Paint Vibrating Screen

Latex paint is a common name for latex coatings. It was born in the middle and late 1970s. It is a large class of synthetic resin emulsion coatings represented by acrylic copolymer emulsions. Latex paint is a water-dispersible paint. In order to improve the quality of products, many companies use vibrating screens to filter and remove impurities, so which screening equipment should be used for this material to have a good effect? We recommend special vibrating screening equipment for latex paint-high frequency vibrating screen.

High frequency screen is a kind of screening machine with low energy consumption, high frequency and ideal filtering effect. It is suitable for the screening and filtering of any powder, granule and mucus in the food industry, chemical industry, pharmaceutical industry, abrasive ceramics, and metallurgical industry. The high frequency sieve is especially aimed at the sieving of glaze in the ceramic industry, and the effect is very significant.

The reason why the high frequency vibrating screen is named "high frequency" is that the motor it is equipped with is a secondary motor, and the motor speed has been increased from 1500rpm to 3000rpm of the ordinary vibrating screen. The increase in the exciting force brought by the high speed , It can quickly destroy the surface tension of the thick slurry, and increase the probability that the material smaller than the separated particle size will contact the sieve of the slurry vibrating screen, thus realizing the efficient screening of the viscous latex paint.

So what should be paid attention to when using high-frequency vibrating screen to process high-viscosity slurries such as latex paint?
1. Because the viscosity of the material is too high, the screen should be cleaned after the screening process is completed every day to avoid the long-term adhesion of latex paint on the screen and cause blockage.
2. The structure of the high-frequency vibrating screen frame adopts a single-mesh double-hoop structure, and the frame is covered with a sub-network large U, which reduces the friction between the network frame and the screen frame. Therefore, in the process of use, ensure that the sub-network is large. U is not worn.

Chat Now