The high-frequency vibrating screen is specially designed for this kind of slurry material that is difficult to filter. Since the screen machine uses a two-stage high-frequency vibration motor with a vibration frequency of up to 3000r/min, it is called a high-frequency vibration motor. This screen machine The machine is called a high-frequency screen. Because this screen machine generally handles impurity filtration of slurry materials, it is also called a high-frequency filter screen.

After purchasing a high-frequency vibrating screen, customers may operate it improperly, making it difficult to screen the materials cleanly. Below we will analyze for you what you need to pay attention to when using a high-frequency vibrating screen:

1. Design of the feed port for the slurry feeding process

Since the slurry has a certain viscosity and very poor fluidity, the slurry needs to be fed in the center, and the center is where the vibration motor has a strong excitation force to facilitate the screening of the slurry.

2. Network blocking phenomenon

Under normal circumstances, due to the high viscosity of the slurry material, partial network blockage is very common. Therefore, customers are required to clean the network frame in time after the end of production in one shift to avoid network blockage caused by not cleaning for a long time.