1、Park the grain collection vehicle to prepare for the opening of the grain suction machine, the vehicle is parked steadily for the operation of the machine is very necessary.

2、Take off the hose of the grain suction machine, install the support rod, and check whether the pipe is well sealed, so that the grain suction efficiency is high, and at the same time it is not easy to have problems.

3、First turn the grain suction machine inlet spiral spring by hand for more than two turns to make sure there is no abnormality, then insert the hose into the grain pile and prepare to start sucking grain.

4、Turn on the power, turn on the switch and observe whether the grain suction machine starts to operate normally.

5、After there is no grain at the grain inlet, don't turn off the grain suction machine immediately, wait for about 10 seconds to make sure that the grain inside the pipe is also sucked into the car.

The correct use of grain suction machine steps for everyone is introduced here, then, in the use of the time may wish to refer to, so that the grain suction machine can play a better role.