1. Sheet thickness

Why is the price of the same type of rotary vibrating screen high or low? In fact, one of the key factors is the thickness of the board. The stainless steel rotary vibrating screen refers to the 304 stainless steel material of the whole machine or 2mm in contact with the material, but the thickness of the plate used by some companies in order to reduce the production cost will be lower than the standard thickness, and the screen frame will appear after the user uses this equipment. For problems such as breakage and reduced service life, please check whether the thickness of the plate is qualified when choosing a stainless steel rotary vibrating screen; the parts contacting the material, such as the screen frame, the mesh frame, the screen, the beam ring, etc., must be made of 304 stainless steel, in order to save Cost expenditure, carbon steel can be used for the base part

2. Screening accuracy

The level of sieving accuracy determines the quality of the material to be screened, and the sieving accuracy is determined by the screen and the exciting force, so high-quality screens and motors are indispensable. When selecting the type, the user needs to consider the wire diameter of the screen, the shape of the mesh, and the excitation force of the motor dynamometer. Under normal circumstances, the impurity removal of rubber additives requires a screen mesh of 60 meshes, a smaller mesh size, and a larger material specific gravity at 1.2. The finer the rubber additive powder, the better the catalytic function. Therefore, its net cleaning device bouncing ball and using silicone material can increase the bounce ability and make the net cleaning effect very good.

3. Output

For the rotary vibrating screen, the diameter of the screen surface determines the output. When purchasing, the user needs to measure the diameter of the screen frame to ensure that the diameter is qualified.

4. Tightness. Sealing performance is a problem that must be considered in the production process of the vibrating screen. Therefore, when the rubber auxiliary vibrating screen is designed, a dust cover needs to be installed on the upper frame, and the mesh frame and the screen frame are sealed with a silicone rubber ring to prevent dust External leakage, lock the tie ring and the screen frame (check if the tie ring is locked, you can use a leather mallet to gently tap the edge of the screen frame to prevent overhead and material overflow.)