How to adjust the angle of the rotary vibrating screen hammer？

 The rotary vibrating screen is a high-precision fine powder screening machine with low noise and high efficiency. It takes 3-5 minutes to change the screen quickly.

The rotary vibrating screen uses a vertical motor as the excitation source, and eccentric weights are installed at the upper and lower ends of the motor to convert the rotational motion of the motor into a three-dimensional motion of horizontal, vertical, and inclined, and then transmit this motion to the Sifting surface. From this we can see that the angle of the upper and lower weights directly affects the effect of material screening. Next, the following analysis is given on the adjustment angle of the weight of the rotary vibrating screen:

1. When the angle is 0 degrees: the material moves from the center to the surrounding rapidly. At this time, the movement track of the material on the screen surface is the shortest, and it is generally used for rough screening of the material.

2. When the angle is 15 degrees, the material moves in a vortex, and the material movement track is moderate, which is mostly used for ordinary screening.

3. When the angle is 45 degrees, the material moves in a vortex. At this time, the moving track of the material on the screen surface is the longest, which is used for precision screening.

4. When the angle is 90 degrees, the material moves from the surrounding to the center, which is generally used for wet screening or screening of special materials.

The above is the trajectory of the rotary vibrating screen weight at different angles. Different angles have different effects on material screening. Users can adjust according to their actual needs.